IMPAK CORPORATION
PAKVF4T9000
PAKVF4T9000
PAKVF4T9000 is an ideal material for packaging products where protection against moisture and puncture resistance is necessary it has a wide range of uses including vacuum packaging where a high barrier film with low MVTR properties is needed. Due to a Tyvek outer layer PAKVF4T9000 offers superior puncture resistance compared to majority of multi layer structures in the industry.
PHYSICAL PROPERTIES
| THICKNESS |
9.0 mil (Nominal) |
| MVTR (MOCON ASTM F-1249 @ 100 F 100 in2/24hrs) |
0.0006gms |
| PUNCTURE RESISTANCE |
29lbs |
| TENSILE BREAK |
MD 4900psi TD 5100 psi |
| BLOCKING |
none |
| OPTICAL DENSITY |
Opaque |
| ELONGATION ASTM D-882 |
MD 23% MD 29% |
| YIELD |
5,300 sqin/lb |
| CONTACT CORROSIVITY (FTMS 101C method 3005 sodium, Flouride, Phosphate & Sulfate Ions) |
No visible sign after testing of deterioration Below Detectable Levels. |
| SURFACE RESISTIVITY (EOS/ESD S11.11) |
PE <10 11 OHMS |
| STATIC DECAY (FTMS 101 method 4046 CAPACITANCE PROBE) EIA-541 |
.05 sec <30 volts difference |
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.
Back to Main Page
©1999-2008 SorbentSystems.Com.
All rights reserved.