SorbentSystems.com

IMPAK CORPORATION

PAKVF4M

PAKVF4M is ideal for packaging of critical components where protection against moisture and corrosion is necessary.

PHYSICAL PROPERTIES (proprietary ALUMINIZED PET structure / adhesive / LDPE)

Total Thickness 3.6 mil
WATERVAPOR TRANSMISSION RATE (ASTM F-1249) <0.02 gr./100in.2 24 hrs.
O2 TRANSMISSION RATE (MOCON) 0.001/cc/m2 /24 hrs.
TEAR STRENGTH (ASTM D1004-66 NOTCHED) MD 4.7 lb.
TD 4.3 lb.
TENSILE STRENGTH (ASTM D882-83, A) MD 9000 psi
TD 10500 psi
BURSTING STRENGTH (FTMS 191-C, 5122) 84 psi
PUNCTURE STRENGTH (FTMS 101-C, 2065.1) >22 psi.
HEAT SEAL STRENGHT (ASTM D-1876-72) > 11 lb./in. width
ELONGATION (ASTM D882-83, A) MD 98%
TD 80%
LIGHT TRANSMISSION (ASTM D1003-77) <.01%
WATER RESISTENCE (FTMS 101-C, 3028, F) NO DELAMINATION


IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.

Back to Main Page
1999-2000 SorbentSystems.Com. All rights reserved.