IMPAK CORPORATION

PAKVAC63CX

The PA/tie/PE/tie/PA/tie/PE composition offers enhanced environmental sustainability over PET/AL/OPA/PE by removing the aluminum layer. This removal notably lowers cumulative carbon output and ensures technical alignment with contemporary mechanical recycling processes. The PA/tie/PE/tie/PA/tie/PE layer lowers total manufacturing energy consumption and greenhouse gas emissions.
Constructed as an all-polymeric film, the PA/tie/PE structure provides a recyclable alternative to multi-material laminates. Although standard curbside programs often exclude these materials, advanced recycling systems utilize modern compatibilizers to blend the PE and PA components. This process allows for the production of high-quality recycled plastic pellets without the need for layer separation, supporting more efficient recovery cycles.

PHYSICAL PROPERTIES ( PA / Tie / PE / Tie / PA / Tie / PE 160 microns )

Total Thickness (mils)	6.3 mil
WATERVAPOR TRANSMISSION RATE (at 23+2 C, 90% RH)	0.06459/100in²/24hr
O2 TRANSMISSION RATE (at 23+2 C, 0% RH)	0.806cc/100in²/24hr
TENSILE STRENGTH (MD >= 20 Mpa/N) TENSILE STRENGTH (TD >= 20 Mpa/N)	30.62N 26.26N
Elongation % (MD >= 30 Mpa/N) Elongation % (TD >= 30 Mpa/N)	5.2438 4.2303
Sealing Strength (N/15mm)	40.5N (165C)

IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.