IMPAK CORPORATION
PAKVAC 6X
PAKVAC 6X
This multi-layer laminated poly nylon film is suitable for use in vacuum packaging where moderate oxygen levels are required. Performs better than coextruded film and is used primarily un Beef, Poultry, and Fish industries.
PHYSICAL PROPERTIES (BON / adhesive / PE)
| Total Thickness (mils) | 3.0 mil |
| WATERVAPOR TRANSMISSION RATE (ASTM F-1249-90) | (.4560 gr./100 inČ 24 hrs.) |
|
O2 TRANSMISSION RATE (MOCON) |
3.5-4.5/cc/100 inČ/24 hrs. |
| TENSILE STRENGTH (ASTM D882-91; A) |
MD 7500 psi
TD 8400 psi |
| ELONGATION (ASTM D882-91; A) |
MD 60%
TD 60% |
| PUNCTURE STRENGTH (FTMS 101-C; 2065.1) | 20.5 lb. |
| LIGHT TRANSMISSION (ASTM D1003-92) | < 90% |
| HEAT SEAL STRENGTH (ASTM D-1876-93) VERTROD | 22 lb./in. width |
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.
Back to Main Page
©1999-2000 SorbentSystems.Com.
All rights reserved.